Bitmain and Canaan to Reveal 5nm Bitcoin Mining Chips in 2020

Last January, the Taiwan Semiconductor Manufacturing Company (TSMC) reported at its annual conference that the company’s 7nm node (N7) was operating under capacity. On top of all this news, next-generation computer makers, iPhone distributors, and bitcoin mining rig manufacturers sought 7nm chips in mass quantity this year creating massive demand. TSMC expected revenue to increase slowly in 2019, but the last two quarters saw better revenue performance than expected. Despite the issues with the company’s 7nm process, TSMC has continuously signaled confidence in its 5nm (N5) process roadmap.

In December, at the IEEE IEDM Conference, the firm discussed its 5nm process in high regard alongside Intel’s slideshow describing 2nm and 1.4 nm chips by 2029. TSMC noted huge differences between the 7nm and 5nm process as the 7nm yields just a touch below 100 million transistors per square millimeter (mTr/mm2). The 5nm technology has shown an average yield of 80%, with a peak yield per wafer of 90%. The Taiwan foundry’s 5nm test chips had shown a die size of 17.92 mm2.

Following the details about TSMC’s 5nm process, two of the largest bitcoin mining rig manufacturers in the world revealed that they would soon be equipped with TSMC’s 5nm chips. Local reports from China disclosed that the company Bitmain Technologies has completed the first 5nm test-grade bitcoin mining chips. At the moment, Bitmain products use TSMC’s 7nm process for the latest 2019 Antminer versions. In October, Bitmain’s CEO Jihan Wu discussed the 5-nanometer technology at the World Digital Mining Summit held in Frankfurt. Various sources have said that Bitmain will be equipped with 5nm by early 2020 and products are set for mass production.

Following discussions concerning Bitmain’s upcoming ASIC rigs, regional reports revealed that Canaan will also have 5nm chips by the first quarter of next year. The 5nm chips will improve performance by 15% and the wafers will stem from the Taiwan-based semiconductor foundry. However, Canaan is a Chinese mining rig manufacturer that purchases semiconductors from both Samsung and TSMC. 8btc editor and reporter Vincent He stressed that Canaan was one of the first companies to reveal its 7nm test-grade mining chip before lots of companies announced use of the semiconductors. The report further detailed that the cofounder of Canaan said that the firm will “have a greater grasp of the supply chain and more capital investment after going public.”

The news of both Bitmain and Canaan steadfastly working to produce mining rigs equipped with next-generation 5nm chips shows how fast the mining industry is growing. With the 7nm process alone in 2019 mining devices have improved a great deal as far as efficiency is concerned. News.Bitcoin.com recently reported on how 2019’s bitcoin miners are 5x faster than predecessors. If it’s true that both companies are planning to produce 5nm equipped models in early 2020, then other manufacturers like Microbt, Innosilicon, and Ebang will likely follow suit.

What do you think about Bitmain and Canaan possibly producing 5nm equipped bitcoin mining devices in early 2020? Let us know what you think about this subject in the comments section below.

Disclaimer: This article is for informational purposes only. It is not an offer or solicitation of an offer to buy or sell, or a recommendation, endorsement, or sponsorship of any products, services, or companies. Neither the company nor the author is responsible, directly or indirectly, for any damage or loss caused or alleged to be caused by or in connection with the use of or reliance on any content, goods or services mentioned in this article.

Image credits: Shutterstock, Extremetech, Anandtech, Bitmain, Canaan, TSMC, Wiki Commons, Fair Use, and Pixabay.

Did you know you can earn BTC and BCH through Bitcoin Mining? If you already own hardware, connect it to our powerful Bitcoin mining pool. If not, you can easily get started through one of our flexible Bitcoin cloud mining contracts.

The post Bitmain and Canaan to Reveal 5nm Bitcoin Mining Chips in 2020 appeared first on Bitcoin News.

 

source: https://news.bitcoin.com/bitmain-and-canaan-to-reveal-5nm-bitcoin-mining-chips-in-2020/

TheBitcoinNews.com is here for you 24/7 to keep you informed on everything crypto. Like what we do? Tip us some BATSend Tip now!